16oz UV DTF Transfers

UV DTF Transfer Application Instructions

Easy to Apply – No Heat Press Needed!

1. Clean the surface thoroughly with rubbing alcohol and allow it to dry completely.
2. Cut out your transfer if needed.
3. Peel the white backing away from the transfer.
4. Carefully align and place the transfer onto your surface.
5. Press firmly using a squeegee, scraper, or credit card, working from the center outward to remove air bubbles.
6. Slowly peel away the clear carrier sheet at a sharp angle.
7. Rub over the design one final time to ensure full adhesion.

✨ Best applied to smooth, hard surfaces such as glass, acrylic, metal, plastic, and ceramic.

Project Chic – Designed with Purpose. Made to Inspire. 💕